A Garage - Step One

The first week of June felt like another beginning. That’s because Tyler Torgerson (Double T Construction) and his crew of three (Darren, Jed and Mel) arrived with backhoe in tow ready to start building our garage.

Even though I had spent much of my childhood playing around the many job sites my dad supervised, I never really observed the actual construction going on. I have to admit it was a little disconcerting to see even a small corner of our smooth, green pasture disappear under a construction zone. Here are the steps to this transformation.

1) With a backhoe, clear the topsoil from the site.
2) Using a laser level, position batter boards to create a perfect rectangle for garage's footprint.
3) Dig trenches for footings.
4) Place forms and rebar in trenches.
5) Cement truck arrives.
6) Pour cement into forms.
7) Screed concrete to create a flat surface for stem wall.
8) Wait for concrete to set.
9) Remove forms from footings.
10) Erect forms for stem wall.
11) Insert and tie together rebar to reinforce stem wall.
12) Have inspector approve foundation prep.

Since this was a short trip, this is all we saw of the foundation work.

While Double T did their job, Scott and I worked on other projects. We finished laying carpet and vinyl in the yurt. To create a kitchen, we assembled a buffet / cabinet with a counter large enough to hold a camping stove and cutting board. The “kitchen” also contains a trash pail, large cooler (refrigerator) and picnic basket (pantry). Next we stalled propane for the stove and a light, brought in our futon and set our camp table and chairs in place. This really made a wonderfully comfortable living arrangement. The first night in the now basically furnished yurt, we realized this was the best “hut” either of us had ever made. If fact, almost simultaneously, Scott and I wondered why we needed a house. However after a few cold nights and hot days, we knew there was something to be said for solid, insulated walls to keep the cold away and the heat at bay.